|      |    DAVE's PARTS FORTHE DISCONTINUED
 HOMEPAGE
 The early Plymouth/Dodge
   273 LA engine was not noted as a major performance motor;
   however, the 4 barrel version, rated at 235 HP (275 HP in
   '66 with options), was a decent performer.  This AFB carb'ed 273 (called
   the "273 Commando" by Plymouth) used a unique
   10.5:1 compression, forged piston that is no longer available
   from MOPAR or TRW/Federal Mogul.
 Because of the difficulty in obtaining
   usable forgings many owners of the early Formula S Barracuda/Dart GT
   are forced to order custom pistons ($600.00 to $800.00)
   or use the 8:1 castings available from MOPAR
   (Kantor advertises these for $40.00 each!).  The reason for
   the existence of this web page is to check the level of interest in either
   reproducing a close copy of the Commando Forging or, perhaps, developing a
   zero deck height, single valve relief, flat top forging that would yield
   about 10:1 compression without excessive deck and/or head milling.
 
 The idea is, that if there is enough interest
   in rebuilding these engines to run the way that Mother MOPAR intended, maybe
   we can get together a large enough order of pistons to "Buy Down"
   the cost.
 
 
  dmapes@erols.com
  THIS SITE
 
  LINKS
 
THE BARRACUDA WEBRING 
       [ Prev 5
| Previous
| Random Site
| Next
| Next 5 ]
 [ List Sites
| Join
| Home
| Message Board ]
 
   THE 1966 FORMULA S BARRACUDA, A NICE FAMILY CAR!
 
 |