| PART NO. |
|
LIST | WEIGHT |
| SCH096C | Carbon Steel Hopper Spreader, w/Standard Length Spinner and Chute Assembly | $3,265.79 | 820 lbs. |
| SCH096CX | Carbon Steel Hopper Spreader, w/Extended Length Spinner and Chute Assembly | $3,329.82 | 830 lbs. |
| SCH096SS | 304 Stainless Steel Hopper Spreader, w/Standard Length Spinner and Chute Assembly | $4,572.40 | 630 lbs. |
| SCH096SSX | 304 Stainless Steel Hopper Spreader, w/Extended Length Spinner and Chute Assembly | $4,672.50 | 640 lbs. |
|
|
|||
| 1499500 | Inverted Vee - Carbon Steel, Black Powder Coat Finish | $56.92 | 20.0 lbs. |
| 1499500SS | Inverted Vee - 304 Stainless Steel | $96.75 | 15.0 lbs, |
| 1498500 | Hopper Top Screens - Black Powder Coat Finish | $160.00 | 70.0 lbs. |
| 1498600 | Heavy Duty Hopper Top Screens - Black Powder Coat Finish | $225.00 | 140.0 lbs. |
| 1403500 | Carbon Steel 12" Hopper Side Extensions | $236.00 | 160.0 lbs. |
| 1495500 | Electronic Engine Tachometer | $56.74 | 0.5 lbs. |
| 1496500 | Hopper Hold Down Kit - Four 1/2" x 6" Heavy-Duty Forged Turnbuckles | $71.01 | 10.0 lbs. |
| 1430034 | 12 Volt, C.C.A. 520 Spreader Battery | $77.40 | 20.0 lbs. |
| 142000A | Standard Length Spinner/Chute Assy., Carbon Steel | $253.36 | 52.0 lbs. |
| 1497500 | Extended Length Spinner/Chute Assy., Carbon Steel | $266.91 | 70.0 lbs. |
| 142000ASS | Standard Length Spinner/Chute Assy., Stainless Steel | $357.06 | 45.0 lbs. |
| 1497500SS | Extended Length Spinner/Chute Assy., Stainless Steel | $490.88 | 62.0 lbs. |
|
|
|||
| 1430025 | Replacement Cab Control Unit | $83.85 | n/a |
| 1430007 | Replacement Vehicle Wiring Harness | $67.85 | n/a |
| 1410250 | Drive Sprocket - Conveyor Chain | $37.80 | n/a |
| 1410302 | Drive Shaft - 1-1/8" OD | $23.30 | n/a |
| 1410200 | Flanged Bearing - 1-1/8'' ID | $18.90 | n/a |
| 1405150 | Idler Sprocket - Conveyor Chain | $35.25 | n/a |
| 1405100 | Idler Shaft - 1" OD | $15.75 | n/a |
| 1410405 | Idler Weldment | $11.40 | n/a |
| 141050W | Take-up Bolt Weldment - Carbon Steel | $2.55 | n/a |
| 1410702 | #40 Roller Chain Sprocket, 16 Teeth, 1" Bore w/Keyway & Set Screw | $14.35 | n/a |
| 1410705 | Drive Shaft Coupling - 1-1/8'' ID | $15.10 | n/a |
| 1412000 | Key - 1/4" x 1/4" x 1-1/2" | $1.05 | n/a |
| 1410800 | Clevis Pin - 3/8" x 2" | $0.65 | n/a |
| 1411000 | Flanged Bearing - 1" ID | $27.85 | n/a |
| 1401150 | 12 VDC Electric Clutch Assembly | $299.35 | n/a |
| 1411800 | #40 Roller Chain Sprocket, 52 Teeth,Clutch Sprocket | $42.85 | n/a |
| 1411907 | 12 VDC Electric Throttle Motor Assembly | $122.30 | n/a |
| 1411915 | #40 Roller Chain Sprocket, 12 Teeth,1" Bore w/Keyway & Set Screw | $11.55 | n/a |
| 1412300 | #40 Roller Chain - 78 Links, (Including Master Link) | $12.40 | n/a |
| 1401100P | Conveyor Chain, including Clevis and Cotter Pins (12" x 123 Links) | $521.50 | n/a |
| 1420150 | Standard Length Spinner Shaft, 3/4" OD | $10.20 | n/a |
| 142X150 | Extended Length Spinner Shaft, 3/4" OD | $13.60 | n/a |
| 1420100 | 3/4" ID Pillow Block Bearing w/Bottom Grease Fitting | $28.75 | n/a |
| 1420004 | #40 Roller Chain Sprocket, 24 Teeth, 3/4" Bore w/Keyway & Set Screw | $29.00 | n/a |
| 1420200 | Spinner Disc Weldment, Carbon Steel | $54.80 | n/a |
| KS301 | Key, 3/16" x 1" | $0.95 | n/a |
| 1420013 | Clevis Pin - 1/4" x 2" | $0.60 | n/a |
| 1430004 | #40 Roller Chain - 76 Links, (Including Master Link) | $12.10 | n/a |
| 141040K | Idler Shaft Rebuild Kit (Carbon Steel) | $136.00 | n/a |
| 141050K | Spinner/Chute Rebuild Kit - Standard Length | $154.45 | n/a |
| 141060K | Spinner/Chute Rebuild Kit - Extended Length | $157.80 | n/a |
| 141030K | Drive Shaft Rebuild Kit | $186.65 | n/a |
Toll Free: (888)-768-8044
Local: (703)-257-1710
Fax: (703)-257-1054
|
|
|
|
|
|
|
|
|
Copyright: ATTS-Page by Data Brain, 11/98, 540-349-1031