Technical assistance and help with parts identification is available for most LogEtronics manufactured or branded film processors and on-line transporters.. This includes certain models of OEM processors sold by Anitec, Linotype, Verityper, DuPont and Kenro.

When contacting the service department, please have available the model number or name of the processor or camera about which you are inquiring and if possible,  try to have your owners manual available.  Over the years many models were given similar sounding names (LD-2600a, Systems 2600, Excel 26, Tek-26 etc.) and often there is some initial confusion over just what model is being discussed.

If you are calling with a problem with the operation of your equipment please try to call from a phone in the same room as the equipment and have your owner's manual available. There have been many times  when a problem has been solved with a few button pushes.

When calling for service information about on-line transporters please tell us the brand name and model
of the imager being used and it's aproximate age. In the last two or three years all the film transporters sold with LogE processors have been manufactured by Bray Imaging Technologies. To avoid confusion with different versions of their circuit boards, we will need to know the model and serial number of your Bray on-line conveyor.

Technical assistance and help with parts identification is available for most LogE/Robertson MD and ML series cameras as well as the vertical and horizontal cameras manufactured by Robertson, the vertical cameras and platemakers manufactured by Kenro and most of the vertical cameras manufactured by Klimsch.
When calling for assistance please be prepared to describe the front panel controls of your camera as several models had changes in their electronics over the life of the product.
Be aware that camera parts are becoming difficult to obtain especially for older models.

In 1996 LogEtronics sold the aerial photographic  and  medical/industrial CRT products division to Egoltronics Corp. These products included the  Aerial Contact Printers and enlargers (MK II, MK IV, MK V, 1010AE etc.)  Medical X-Ray reducers (MC-35, MC-105 etc.) and electron microscopy enlargers (EM-55 etc).
For Egoltronics Sales call 703-237-2501 or fax 703-237-3151
For Egoltronics Parts and Service call 304-897-6359 or fax 304-897-6556
E-mail rfmfg@hardynet.com

SERVICE DEPARTMENT DOWNLOADS

These are provided in PDF format. You will need the free Adobe Acrobat reader
(a link is provided below).
If you want to by-pass viewing before downloading right click on the file name and choose "save target as" from the drop-down menu.

Instructions for Using LogEsol liquid 3-Part developer systems cleaner  LogEsol.pdf  86kb	Instructions for installing the  Daylight Load Cassette Box on the  Current Models of 22", 27" and 32" processors.  Casette.Txt 1kb	Multi-Control Board Service Guide for the LogELine-17a, 25a, TEK 25, 26 & 48, RA 2600s & 3200s etc. LL17.PDF 150K
Instructions for installing the Solid State Relay kit (975-00-973) to increase reliability in  LL processors that use the  Relay Power Board (326-00-243-01)  SSRelayKit.pdf 45kb	Service Manual for the LL1716, 2516, 3316, 3916 Processors - Covers Installation, Operation, Troubleshooting and Schematics. The parts section may be found elsewhere on this site. MS_Man_Xpts.pdf 899kb	Also for the LL1716 etc Series of processors MS- Service Notes: A collection of in-depth tech notes covering Power Distribution, Transport, Temperature, Circulation / Low Level and replenishment. Includes the TS10 circuit board road map diagram MS_Service_Notes.pdf 219kb
MD 460, 470, 480 Camera Memory Erasure Procedure. MD_Erasure.PDF  91kb	Schematics and Wiring Diagrams for the current series of processors LL-1712 through LL-5429. Icluding 2218, 2229 etc These are common to all models including older MQE. tschematics-all.pdf	Pre-Installation information for LL1712 through LL5411 LL1712-5411.PDF  118kb
How to program the Microprocessor Operators Panel (MPOP) on the LL2120, MX2629 et al mpop-program.PDF 91kb	Service Information for LL1712 through LL5411 (Section 5 in Manual) excluding schematics  Section-5-Service.PDF 191kb	Diagnosing and repairing speed problems in LL Processors with DDAS or MPC boards. ll-speed-problem.PDF  29kb
How to install the Heat Exchanger Kit L975-00-911 in the LL2XXX series processors. This kit replaces the in-tank heaters. Heat Exchanger Notes.pdf 112kb	AC Wiring diagram for LogEline processors Including 2100-2800-3700-2120 also Linotype 2300-2500 processors llacschematic.pdf 80kb	Wiring diagram for LogEline processors Including 2100-2800-3700 and Linotype 2300-2500 With DDAS and LST front panel boards. ddaswiring.pdf 97kb
Wiring diagram for LogEline processors IncludingLL2120F and 3720F With MPOP and MPC Microprocessor boards. mpcwiring.pdf 97kb

Download Acrobat Reader from Adobe to view and print PDF files.
 

.