

Caculate and Compare Anti Roll Bar
Rates 

NOTES:
 Solid bars have a 0 (zero) inside diameter.
 Rates calculated are for relative comparisons
only and do not equate to absolute values
(i.e., Lbs/In or Kgs/mm).
 Consistant units of mesure are essential, so
convert all units to inches OR mm (1 inch = 25.4 mm).
 If the smaller bar calculats out stiffer than
larger one (comparing some solid bars to some
tubular bars for example) the percentage calculations
will be wonky.
JavaScript must be turned on for the browser to perform these calculations.
Last Updated: 8/17/2004
Return to Calculations Menu
